Technical article 104879

How to configure remote line printing with IBM AIX.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

How can I configure an IBM AIX system to act as a print server for my SCO UNIX system?

Solution

          IBM's AIX operating system uses "qdaemon" as its default network
	  print daemon.  SCO requires the use of "lpd" as the network print
	  daemon.  To change AIX from the default of qdaemon, refer to the
	  Reference System Management Guide, Chapter 11 (for AIX version 3.2).
	  There is a section on using SMIT to change from qdaemon to lpd.
NOTE:     This is done when the printer is configured by SMIT.

This also applies to AIX version 4.x.

NOTE:     On the OpenServer server remember to ensure that "lpd" is enabled in
          scoadmin printer -> System -> Print Services -> Enable Remote Printing

Also, ensure the printer is enabled to accept remote prints.

TROUBLESHOOTING:
To troubleshoot:

a) Can both servers ping each other? b) Is /etc/hosts.lpd and/or hosts.equiv configured? c) Can the AIX server be configured to run rsh services?

From the Xinuos technical article database, record 104879. Reproduced with permission. The original is at www.sco.com/ta/104879, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.