Technical article 101297

How to create an IPX/SPX DOS component diskette in OpenServer 5.0.2 and 5.0.4.

OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

There is no IPX/SPX DOS Component diskette shipped with the OpenServer and Internet FastStart products.

Solution

An image of the required DOS floppy is stored on the installation
CD-ROM.  To create the floppy, take the following steps:
NOTE: The '#' below is the root prompt.  Do not type it as part
of the command.

1. Label a floppy diskette, "IPX/SPX DOS Component", and use format(C) to format the diskette:

# format

2. Mount the CD with the following command:

# mount -r /dev/cd0 /mnt

3. Change to the directory where the image is stored:

# cd /mnt/images/ipxspx

4. Use dd(C) to copy the image to the formatted diskette:

# dd if=01 of=/dev/install bs=9k

5. Verify that the sum of the diskette matches the sum stored in 01sum:

# sum -r /dev/install

The output should be the same as:

# cat 01sum

See also

For further instructions, see "Installing and using the DOS component" in the Networking Guide.

From the Xinuos technical article database, record 101297. Reproduced with permission. The original is at www.sco.com/ta/101297, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.