Technical article 110138

How to install VisionFS 3.0 from the Vision2K CD-ROM on SCO OpenServer 5 and UnixWare 7 when the Optional Services CD is not available.

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6UnixWare 7.0.0UnixWare 7.0.1UnixWare 7.1.0UnixWare 7.1.1

Written · Last revised

Problem

I have tried to install VisionFS 3.0 from the Vision2K CD-ROM using the Software Manager, but I do not see the selection for VisionFS 3.0.

NOTE:     SCO VisionFS 3.0 is supplied as part of the UnixWare 7 and SCO
          OpenServer 5.0.x media kit. It is recommended VisionFS 3.0 be
          installed from the UnixWare 7 or SCO OpenServer 5.0.x Optional
          Services CD-ROM using SCOadmin (Software Manager).

Solution

The proper installation of SCO VisionFS 3.0 on UnixWare 7 or SCO OpenServer 5 is from the Optional Services CD-ROM using SCOAdmin (Software Manager). However, there are occasions when this CD-ROM is not available, and the Vision2K CD-ROM is.

The Vision2K version 2.0 CD-ROM is not viewable from the SCO SCOadmin (Software Manager). It must be mounted manually.

Methods to mount the CD-ROM drive vary between operating
systems and individual systems.  Your system may vary from
the examples described below, so consult your documentation
for specific instructions on how to mount a CD.

An example of mounting the CD drive on UnixWare 7:

mount -r -Fcdfs /dev/cdrom/cdrom1 /mnt

An example of mounting the CD drive on OpenServer 5:

mount -r /dev/cd0 /mnt

In it, there are two directories with the following files:

/mnt/VFSOS5
    readme.txt
    vfsos5.tar
/mnt/VFSUW7
    readme.txt
    vfsuw7.tar
    tluw7.tar

Untar the files into a tmp directory and you will get the media volumes:

cd /tmp
tar -xvf /mnt/VFSUW7/VFSUW7.TAR
       -or-
tar -xvf /mnt/VFSOR5/VFSOR5.TAR

Then, from the Software Manager, install the media images pointing to the tmp directory path. Installation will proceed normally at this point. You will be prompted for any necessary information.

See also

There are a number of Technical Articles that may help you during, or right after, the installation of VisionFS 3.0:

ta108345, "Installing VisionFS gives the error 'Failed to open udp port 138. Bind error'."

ta108263, "How to install SCO TermLite bundled with SCO VisionFS."

ta108250, "VisionFS installation tips and troubleshooting guidelines."

ta109269, "The default values for VisionFS on UnixWare 7 can't be changed at installation time."

ta110047, "How do I install SCO VisionFS 2.01 for SCO OpenServer
5.0.5?"

ta110073, "How do I copy the information in my VisionFS current.prf profile to another VisionFS server or back up the profile on my present installation?"

ta109925, "How can I make changes to my Windows registry more safely?"

ta109220, "Windows 98 and Windows 95 with MS patches SECUPD.EXE, SECUPD2.EXE or NWREDUP4.EXE installed gets 'Password Incorrect' when trying to connect to a VisionFS share."

ta109210, "How can I get the latest release of any of the Vision97 products?

ta109205, "Accessing the VisionFS visiontools share, I get the error message 'Access to the specified device, path, or file is denied'."

ta108359, "How do I specify the VisionFS administrator?"

ta108223, "I'm running SCO Vision products over Microsoft TCP/IP. How can I find out what TCP/IP settings are installed at my site?"

ta108200, "How can I locate the master browser for a VisionFS 1.2, 2.0 or 2.01 server?"

ta108198, "Authorization fails with NT 4.0 box with Service Pack 3 installed."

ta108093, "The VisionFS host doesn't appear when Windows 3.11 is the master browser."

ta110021, "Explanation of the Vision2K licensing schema."

ta109942, "Do Vision2K products require new licenses?"

From the Xinuos technical article database, record 110138. Reproduced with permission. The original is at www.sco.com/ta/110138, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.