Problem
I need to confirm whether or not I have the latest driver available for a device in my SCO OpenServer system, especially in regard to the Host Bus Adapter and Network Interface Card drivers. Where can I view the date and version of a driver? How do I know if this is the most recent driver available?
Solution
First, look for this information in the Software Manager. If you do not see a separate entry listed in the Software Manager display (at the top level without expanding any of the directories), then you are using a driver that was included on your original SCO OpenServer installation media. If you have installed a separate driver from SCO's ftp site, or one provided from another hardware manufacturer, you would expect to see an entry listed for that software.
The second place to look for a version and date stamp left on the driver file itself, in the Link kit directory.
The information returned by the 'what' command varies from file to file. Therefore, this is not a useful method for determining the exact version or creation date of a file; however, it is a useful way to compare two driver files against one another. This method requires that you know the name of the driver in question.
To find this information, run the following command:
hwconfig -hcYou will see entries similar to these examples for your devices, including the names of currently used drivers.
An example entry for a host bus adapter using the 'alad' driver is:
adapter 0x7200-0x72ff 9 - type=alad ha=0 bus=0 id=7 fts=sto
An example entry for a network card using the 'pnt' driver is:
pnt 0x7000-0x7012 5 - pnt0 ver.3.0 addr=00:80:5f:e4:0e:d0Now you can navigate to the driver file in the following directory:
/etc/conf/pack.d/<drivername>/A listing of this directory shows a file called Driver.o.
Run the 'what' command to see the date and version stamp on this file:
what Driver.oThe version numbers and letters, as well as the dates, can be compared to other copies of the driver. For example, SCO's ftp site at:
ftp://ftp.sco.comcontains the most recent drivers available from SCO. Any driver from this site can be downloaded to a /tmp directory on a system; the 'what' command can be run on its Driver.o file and used for comparison.
The date listed on the ftp site can be helpful. If it is obviously after the date of the driver in a system, then you do not have the most recent driver. However, keep in mind that this is the date the driver was put on the ftp site, not the actual driver creation date.
See also
ta105661, "Where can I find new or revised drivers for graphics cards on SCO OpenServer 5?"
ta101598,"Where can I find new and revised drivers for network cards on SCO OpenServer 5?"