Technical article 110511

HP NetServer LH 3 or LH 4 system locks up with the error "istat=02:LSS_PAR on ha=0 sist0 =01 sist1=00 !!!!".

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

My HP NetServer LH 3 or LH 4 locks up with the error:

istat=02:LSS_PAR on ha=0 sist0=01 sist1=00 !!!!

Cause

A possible cause for this is an incompatibility between the Symbios SCSI driver and SCO Doctor, which has been found to be accessing the Symbios controller registers.

Solution

Disabling SCO Doctor is the only known solution at this time. The agent process for Doctor may be stopped at any time by doing the following:

At the UNIX command prompt, type "doctor" and press <Enter>.
This will cause a menu to be displayed.  Tab to "Tools".
Highlight "Agent Control", and choose "Stop".

If SCO Doctor is not present and the panics are occurring as described above, then it may be necessary to update the system BIOS or the Symbios controller driver.

For the LH 3, the system BIOS should be updated to revision 4.06.27PL or greater. The 4.06.27PL BIOS is on Hewlett Packard's L.15.10a Navigator. The HP NetServer LH 3 website at:

http://www.hp.com/cposupport/prodhome/hpnetserve6717.html

has a newer BIOS, revision 4.06.31PL, which can be used instead, if version 4.06.27PL does not work. Some servers will require the older BIOS, and some will require the newer one.

For the LH 4, the system BIOS should be updated to revision 4.16.19PS or greater. See the HP NetServer LH 4 web site at:

http://www.hp.com/cposupport/swindexes/hpnetserve10707_swen.html

It may also be helpful to upgrade the SCSI driver "slha" for the Symbios adapter chipset. Not to be confused with the system BIOS, the latest reported version of this driver is V4.11.00. This update is currently available from LSILogic at:

http://www.lsilogic.com/support/support+drivers/scsi/SCO_Open.html
Note that the 'btldinstall' utility will be necessary to upgrade
this driver on an already installed system.  Consult the manual
page on btldinstall(ADM) for details.

One remaining solution is available for this situation, if time does not allow further troubleshooting and diagnosis. Replacing the Symbios host adapter with another supported brand and model of host adapter has proven effective in these instances. Consult the SCO Hardware Compatibility website at:

http://www.sco.com/chwp

for a list of SCO Supported host adapters.

See also

Manual page: btldinstall(ADM)

From the Xinuos technical article database, record 110511. Reproduced with permission. The original is at www.sco.com/ta/110511, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.