Technical article 105427

I am having problems installing the Compaq Deskpro 4000 with OpenServer 5.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

When I install SCO OpenServer 5 on the Compaq Deskpro 4000, the installation fails because the CD-ROM is not found.

Solution

This is a CD-ROM default jumpering problem. You need to remove the cover from the chassis. Next, verify that the CD-ROM and IDE hard disk are on separate cables by visual inspection. Then remove the CD-ROM drive and look at the three jumpers at the back of the CD-ROM unit. You will see:

X       X       X
X       X       X
M       S       C
A       L       S
The jumper needs to be moved from the CS choice to the MA (Master)
choice.  The CD-ROM unit should now be found by the SCO OpenServer
installation.

From the Xinuos technical article database, record 105427. Reproduced with permission. The original is at www.sco.com/ta/105427, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.