Technical article 105916

I can't get my AcerAltos 17000 platform to work in multiprocessor mode under SCO OpenServer Release 5.0.4

OpenServer 5.0.4

Written · Last revised

Problem

My AcerAltos 17000 Twin or Quad Pentium 60MHz platform hangs or panics when I reboot it after installing and licensing the SMP product. I have tried many different things to make it work, but it still hangs or panics when SMP is configured in the kernel. The system works with no problem in single-processor mode, and was previously working fine in multiprocessor mode under OpenServer Release 5.0.0 and 5.0.2.

Solution

The AcerAltos Twin and Quad Pentium 60MHz platform was only tested and certified by SCO under SCO OpenServer Release 5.0.0. It was neither tested nor certified under SCO OpenServer Release 5.0.4 and has been reported _not_ to work in multiprocessor mode under this release.

The system seems to work fine in single-processor mode. This platform is not supported by Acer nor by SCO under SCO OpenServer Release 5.0.4 in multiprocessor mode.

From the Xinuos technical article database, record 105916. Reproduced with permission. The original is at www.sco.com/ta/105916, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.