Technical article 109349

I can't install more than four disks during 5.0.4 installation fdisk/divvy.

OpenServer 5.0.4

Written · Last revised

Problem

Following the SCO OpenServer 5.0.4 installation prompts, I can't
badtrk the fifth disk or add additional disks. The installation
fails with the fifth disk being assigned a non-zero lun.

Solution

This problem is resolved in SCO OpenServer 5.0.5.

For SCO OpenServer 5.0.4, configure no more than four disks during installation. Configure additional disks after the operating system installation is complete, using the SCOadmin Hardware/Kernel Manager, or 'mkdev hd' at the command line.

See also

SCO OpenServer Handbook, Chapter 17: Adding hard disks.

The manual pages for mkdev(ADM), scsi(HW), and Sdsk(HW)

From the Xinuos technical article database, record 109349. Reproduced with permission. The original is at www.sco.com/ta/109349, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.