Technical article 100050

I can't set up a BDC using the default domain name "DOMAIN".

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

During the installation of the Advanced File and Print Server, you are asked to fill in the details of the Advanced Server Configuration as detailed below. The Domain name is set to "DOMAIN" by default.

 --------------------- Advanced Server Configuration ------
|                                                          |
| Name of this Advanced Server:   |SCOBDC________________| |
|                  Server Role:   < > Primary <*> Backup   |
|    Primary Domain Controller:   |SCOSYS________________| |
|                       Domain:   |DOMAIN________________| |
|       Administrator Password:   |______________________| |
|             Confirm Password:   |______________________| |
|                                                          |
|[   OK   ]              [ Cancel ]             [  Help  ] |
|                                                          |
 ----------------------------------------------------------

If you are setting up a Backup Domain Controller and choose the default Domain name "DOMAIN", the following error will occur on the Backup Domain Controller when Advanced File and Print Server is started:

Initializing local SAM database using info from SCOSYS...
Verifying Administrator account password...
Advanced Server configuration log:
Initializing local SAM database using info from SCOSYS...
The SAM database was successfully created.
Verifying Administrator account password...
ERROR:  The server SCOSYS is not the primary domain
controller for domain.  It is the primary domain
controller for domain instead.
Reconfigure the primary server SCOSYS so it is the
domain controller for domain, or use netconfig to
reconfigure this server and try again.
Aborting configuration.

Solution

This has been reported to SCO Engineering.

As a workaround, change the Domain name to something other than "DOMAIN". This should be done on the Primary Domain controller first and then on all Backup Domain controllers.

In AFPS this can be achieved through the Network Configuration
Manager by selecting "SCO Advanced Server" and "Modify protocol
configuration" through the "Protocol" menu. You will be notified
that the server will be stopped and that local databases will be
reinitialized.  Enter the new domain name, exit the Network
Configuration Manager, and restart the server using:
# /etc/asusrv start

This problem is fixed with APP606A and with AFPS 4.0.2.

See also

SCO Advanced File and Print Server System Guide, Chapter 5, Managing servers and domains.

From the Xinuos technical article database, record 100050. Reproduced with permission. The original is at www.sco.com/ta/100050, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.