Technical article 110927

I can't transfer binary files over a telnet session to SCO OpenServer.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

I have installed a third party product to support file transfer
over a telnet session, from a Windows system to SCO OpenServer.
Most files transfer without any problems, but some graphic and
binary files will fail to transfer, which can result in a zero
length file being placed on the server.  A hex dump of the files
that fail to transfer reveals that they contain the character string
0xff.  The files transfer successfully via ftp.

Cause

Per rfc 854, the 0xff character, when transmitted as data, is
supposed to be repeated, so that on receipt it will be interpreted
as data and not meta-data.  The repetition of this character string
is necessary to a properly transmitted, non-corrupted file. However,
the telnet daemon included in SCO OpenServer 5.0.5 does not strip
off the second 0xff, and due to resulting checksum errors, the file
transfer does not succeed.

Solution

This problem has been reported to SCO Engineering.   Use a Windows
ftp client as a workaround.

From the Xinuos technical article database, record 110927. Reproduced with permission. The original is at www.sco.com/ta/110927, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.