Problem
After installing ARCserve/Open, I was able to configure and use my
SCSI tape drive without problems. However, after I installed the
ARCserve/Open Changer Option, I still can't use the changer. Cause
The tape changer isn't configured by default. The changer must be
configured manually before it can be used with ARCserve. Solution
To configure the tape changer, you must log in to the system as root
or have root equivalent privileges. You cannot configure the changer
as a queue user; you must be root or have root privileges. Once you
have root privileges or have logged in as root, follow these steps:1. Start SCO ARCserve/Open.2. Select the Device Management option from the main menu options.
3. Select the Device Group Configuration button.
4. Select the SCSI ID for the changer.
NOTE: If your changer has only one SCSI ID for both the changer and the tape drive, click the arrow next to the device for changer options.
If you select the changer on the left side, a changer button underneath Remove appears.
5. Select the changer button.The Changer Configuration window appears.6. Select the type of changer you are using.
If the type of changer you are using is different than the one that displays, open the Changer Type menu and choose your changer from the list.
7. Check if there is a tape head-cleaning cartridge in the changer.
If you reserve the last slot in the changer for a tape head cleaning cartridge, mark this option.
8. Enter the tape drive's SCSI ID.
If you are using the type of changer that holds more than one tape drive, or that has a different SCSI ID for the tape drive and the changer, enter that SCSI ID here.
9. Create the tape device groups.You need to assign a tape device group to each tape drive in your changer (even if there's only one).
10. Click OK.The tape server will restart with the configuration changes. Now the queue owners should be able to administer the changer.
NOTE: This material is covered in the SCO ARCserver/Open Changer Guide.
This guide can be accessed from the desktop help icon once the
changer option has been installed on the system. See also
TA100079 "The system owner can't run ARCserve/Open functions on a UnixWare 2.1.2 system."