Technical article 100100

I cannot access Exabyte EXP-8900 with ARCserve emergency boot/root floppies.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After installing ARCserve with this Exabyte EXP-8900 rev V35c, ARCserve is able to back up and restore files with the Exabyte EXP-8900. If emergency boot/root floppies are created with the ARCserve -> Manager -> Create Recovery Disk Set, ARCserve, when run with that set, will not see or access the Exabyte EXP-8900 and ARCserve will not start.

Solution

This tape drive is not supported by SCO.

NOTE:     Backup tapes created with SCO ARCserve will contain valid data.
          Use ARCserve -> Manager -> Merge tape to merge SCO ARCserve tapes
          into the ARCserve database after completion of a fresh installation
          of SCO OpenServer 5.0.x and SCO ARCserve 2.x.

See also

man as_merge, as_scan (ARC)

From the Xinuos technical article database, record 100100. Reproduced with permission. The original is at www.sco.com/ta/100100, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.