Technical article 109609

I cannot get my Compaq Professional Workstation 5000 to install SCO OpenServer or UnixWare.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4UnixWare 7.0.0UnixWare 7.0.1

Written · Last revised

Problem

My Compaq Professional Workstation 5000 hangs or panics when I try
installing SCO OpenServer and UnixWare products.  Messages similar
to the following may appear when checking for installed hardware:

Panic: kernel mode address fault at user address 0x12x8c95a

- OR -
Notice: cpqsc, 2 Cannot get BM_BRDID
and then installation fails.

(Note that the above address is an example only and yours may differ.)

Solution

The Compaq Professional Workstation 5000 has not been tested or certified under SCO OpenServer or UnixWare products and has been reported not to work under these releases.

See also

The SCO Hardware Compatibility Web Page:
http://www.sco.com/chwp
Compaq Computer Corporation Support Web page:
https://www.hpe.com

From the Xinuos technical article database, record 109609. Reproduced with permission. The original is at www.sco.com/ta/109609, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.