Technical article 109421

I cannot install Microsoft FoxPro 2.6 on SCO OpenServer 5.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

When I attempt to install Microsoft FoxPro 2.6 using the Software Manager, I get this error message:

foxCompress: cannot open

Cause

This is caused by an incompatibility in the product init script when used under SCO OpenServer 5's Software Manager.

Solution

The following procedure should be done in multiuser mode from the console.

1. Before you start the installation, insert the first of four
   diskettes.  While logged in as root, type:
cd /
tar x6v ./tmp/foxCompress
cp /tmp/foxCompress /tmp/foxfoo
(This assumes that your 3.5" floppy is configured as the first
drive in the system.  If it is the second drive, use
"tar x7v ./tmp/foxCompress".)

2. Bring up the Software Manager/Custom and choose to install new software from the floppy drive of localhost.

The Software Manager now prompts for all four diskettes and starts the product install script.

3. When you get the error message, switch to another screen and:

cp /tmp/foxfoo /tmp/foxCompress

4. Back on the custom screen, select "r" for retry, and continue the installation.

5. You can safely ignore this error message:

Cannot open '/dev/fd0'
NOTE:     The only version of Microsoft Foxpro Database Management System
          for SCO UNIX is version 2.6.  Neither Microsoft nor SCO currently
          support this particular product.

From the Xinuos technical article database, record 109421. Reproduced with permission. The original is at www.sco.com/ta/109421, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.