Technical article 100064

I cannot log in or connect more than 3 clients using AFPS on OpenServer Host.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I am running the SCO Advanced File and Print Server product (AFPS) on an SCO OpenServer Host system using the NetBEUI network protocol. I can only log in a maximum of three clients. Any attempt to log in another client results in a message similar to this:

The domain password you supplied is not correct, or access to your logon server has been denied.

Also, any net commands run on the AFPS console may result in:

Error 53 has occurred The network path was not found

Cause

By default, SCO OpenServer Host systems do not ship with support
for any networking protocols. The NetBEUI protocol is supplied as
part of the AFPS product rather than being a protocol available
within SCO OpenServer.  The OpenServer Host configuration therefore
may not be sufficiently tuned for applications that make use of
STREAMS resources.

Solution

At the very least you will need to increase the kernel parameters NUMTIM and NUMTRW using configure(ADM). Increasing their value from the default of 16 to a value of 32 should be sufficient to allow 5 users to log in. It may also be necessary to increase the values of NSTREAM and NMUXLINK as more clients log on.

See also

SCO Advanced File and Print Server Administrator's Handbook, Chapter 7, "Monitoring and tuning the network".

From the Xinuos technical article database, record 100064. Reproduced with permission. The original is at www.sco.com/ta/100064, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.