Problem
I cannot access my printer directly from SCO Merge. According to the SCO Merge User's Guide there is no additional configuration needed to access a printer, directly bypassing the UNIX print spooler.
Solution
There is no need for additional configuration. During
installation, SCO Merge should have included all the
required entries.1. Make sure that the printer is not enabled under the UNIX spooler:
disable printer_name2. In the Merge Setup, from DOS or MS Windows setup, select "DOS Direct Port 1" as the port to be attached.
3. Make sure the SCO Merge files include the following, if not, you could add it manually using your preferred editor:
# vi /usr/merge/admin/tokenslp0:lp0.prt:DOS Direct Port 1 lp2:lp2.prt:DOS Direct Port 2 doslp:doslp.prt:doslp
# vi /usr/merge/admin/lp0.prt and /usr/merge/admin lp2.prtattachtype=direct
failureaction=warn
irq=7
ioports=378-37a# vi /usr/merge/admin/lp2.prtattachtype=direct
failureaction=warn
irq=5
ioports=278-27aYou should now be able to print from DOS or MS Windows depending
on your setup. At the command line option, start the session
with "dos +alp0" or "win +alp0" (assuming that the printer is
connected to the first parallel port at irq=7).