Technical article 118811

I cannot set TCP to use a DHCP-Assigned address in netconfig(ADM).

OpenServer 5.0.6

Written · Last revised

Problem

I am trying to set up the network to look for a DHCP server.  I have
OpenServer 5.0.6 which fully supports being run as a DHCP client, but
when I run netconfig(ADM) to configure the network card and TCP/IP
protocol there is no choice to configure TCP/IP to use a DHCP-Assigned
address.

Cause

The RS506a Release Supplement for OpenServer 5.0.6 has not been fully installed.

Solution

Download and install RS506a from ftp.sco.com, making sure that all packages in the supplement are installed.

When you run netconfig the next time and set up the TCP/IP protocol, you will see the following check box:

Use DHCP-Assigned Address

Choose "Yes" and network card will obtain an IP address from a DHCP server at the next reboot.

See also

netconfig(ADM), dhcpd(ADMN)

From the Xinuos technical article database, record 118811. Reproduced with permission. The original is at www.sco.com/ta/118811, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.