Technical article 110980

I get a reboot error "Configuration buffer full (MAX_CFGSIZE=2048 exceeded)" on SCO OpenServer 5.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

When I reboot the server, I get the error:

Configuration buffer full (MAX_CFGSIZE =2048 exceeded)

Cause

This parameter is one of two that controls the size of the
configuration string buffer and size of the kernel profile symbol
table.  This is the maximum size of information available using
/dev/strings/cfg as described on the string(M) manual page.  When
the limit for MAX_CFGSIZE parameters is exceeded, this message
is displayed.

Solution

Increase the MAX_CFGSIZE kernel parameter, located in the
Miscellaneous System Parameters section of the configure(ADM)
program.  The default is 2048 bytes.  Adjust the parameter
appropriately for your system configuration.

See also

Manual pages: configure(ADM), string(M)

From the Xinuos technical article database, record 110980. Reproduced with permission. The original is at www.sco.com/ta/110980, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.