Technical article 114422

I get error messages during SCO OpenServer 5.0.5 installation with any Compaq Array Controller that has a large Boot Logical volume.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

SCO OpenServer 5.0.5 Installation, while having Compaq Array controller as primary for Boot Logical volume sizes greater than 17 GB, will display an error window with the following message during file-system creation time:

Exit Value: 1      Status value: 256
SCSI Version: 0
Vendor = COMPAQ
Product = LOGICAL VOLUME
No bad blocks found

Two buttons are provided at the bottom of the screen, "IGNORE" and "RETURN TO IQM".

HARDWARE: Compaq Smart Array 5300 Controller
          Compaq Smart Array 4200 Controller
          Compaq Smart Array 3200 Controller
          Compaq Smart Array 431 Controller
          Compaq Smart Array 4250ES Controller
          Compaq Integrated Smart Array Controller
          Compaq RAID LC2 Controller

Solution

Install SCO OpenServer 5.0.5 on a Boot Logical volume size less than 17GB

OR
Choose SCO OpenServer 5.0.6 for Installation.

From the Xinuos technical article database, record 114422. Reproduced with permission. The original is at www.sco.com/ta/114422, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.