Technical article 109935

I get "Memory excessively fragmented" when attempting to install OpenServer 5.0.5 using a Boot Time Loadable Driver (BTLD).

OpenServer 5.0.5

Written · Last revised

Problem

I get the message "Memory excessively fragmented" when attempting to install OpenServer 5.0.5 using a Boot Time Loadable Driver (BTLD).

Solution

There are two alternative solutions to work around this problem.

Solution #1

Use the "mem=" bootstring to define the available range of memory for OpenServer to use during installation. First, determine the memory:

1. Insert the floppy labeled "SCO OpenServer 5.0.5 Boot Disk" and power up the system. While the system is powering up, note the amount of system memory (RAM) as reported by the computer's Power On Self Test (POST).

2. At the Boot: prompt, issue the bootstring:

mem=1m-16m,16m-<total system memory>m/n

where <total system memory> is the number reported by your computer's POST.

For example, if your machine has 64MB of RAM, the bootstring would be:

mem=1m-16m,16m-64m/n

3. The Boot: prompt will be displayed again. Follow the instructions provided with your BTLD to link the BTLD and continue the installation.

Solution #2

If your BIOS supports disabling shadow memory (RAM) for video, disable it through the system's setup program.

From the Xinuos technical article database, record 109935. Reproduced with permission. The original is at www.sco.com/ta/109935, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.