Technical article 104830

I get "No user licenses were found on this machine" message at boot time.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

I have installed SCO OpenServer Release 5.x onto my system
successfully.  I have rebooted the system and just before the
SINGLE USER MODE prompt, I get this message:

No user licenses were found on this machine. Please boot single user and correct this situation. Licensed software will not operate until user licenses are installed.

The License Policy Manager Daemon (ifor_pmd) was unable to start. This is usually due to a read-only root filesystem, lack of user licenses or a damaged program image file (/etc/ifor_pmd). If this is not the case, please contact your SCO service provider.

Cause

This error message is usually due to a lack of user licenses
or a damaged program image file (/etc/ifor_pmd).  It may also
occur if the date reported by your PC's CMOS clock is set to
a date prior to May 1995 during installation.

Solution

Set your PC's CMOS clock to the correct date and time by entering System Maintenance Mode and running asktime(ADM).

From the Xinuos technical article database, record 104830. Reproduced with permission. The original is at www.sco.com/ta/104830, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.