Problem
After installing the LAN Manager Client that comes with SCO
OpenServer Enterprise, or after installing Advanced File and Print
Server, the netbios daemon fails to start and I cannot use the
product. If I type:# netbios startthe command fails with the following error message:
Starting NetBIOS: nbd: Bound to wrong address Cause
On SCO OpenServer, products such as AFPS and LMC use OpenServer's NetBIOS.
Other products, such as SCO VisionFS, Samba, and FacetWin install their own proprietary NetBIOS server.
In any of these environments (it is not possible to run more than one NetBIOS server) when the LAN Manager client or AFPS are installed, and attempt to run the OpenServer NetBIOS server, the daemon fails to start with the above error message.
Solution
You can only run one NetBIOS server at a time.
To allow the OpenServer NetBIOS server to properly start, you must stop the other application that is using NetBIOS and stop NetBIOS.
For details about how to stop the application, see reference manuals for that specific application.
To stop NetBIOS, use the command:# netbios stopOr, if you want to make sure the OpenServer NetBIOS does not get restarted when the system is rebooted, then rename the file:
/etc/rc2.d/S86netbiosto:/etc/rc2.d/s86netbiosThen, since the OpenServer NetBIOS won't need to be stopped when the system is shut down, rename the file:
/etc/rc0.d/K72netbiosto:/etc/rc0.d/k72netbios See also
TA108345, "Installing VisionFS gives the error 'Failed to open udp port 138. Bind error'."