Technical article 105085

I get the error "No SCSI host adapter found" when trying to install.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I am installing on a Toshiba Tecra 700CT. This Notebook PC has a built-in ATAPI CD-ROM drive. When I attempt to install the system, I select "SCSI CD ROM" as the Media device to be used, but I get this error message:

No SCSI host adapter was found. You must have a SCSI host adapter configured before you start your installation. Please read the Hardware Compatibility Handbook to determine how to configure your adapter.

Cause

There may be a conflict between the Boot kernel's dptr and wd drivers that causes the detection of the ATAPI EIDE Controller to fail.

Solution

Disable the dptr driver from the Boot kernel using this boot string:

defbootstr ahslink=atapi disable=dptr

If you are installing SCO OpenServer Release 5.0.0 using the AHS 5.1 or AHS 5.2 BTLD, use the boot string:

defbootstr ahslink=wd disable=dptr

If you are using the SCO OpenServer 5.0.2 Boot disk, use the boot string:

defbootstr disable=dptr
NOTE:     This workaround may apply to systems other than the Toshiba
          Tecra 700CT.

From the Xinuos technical article database, record 105085. Reproduced with permission. The original is at www.sco.com/ta/105085, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.