Technical article 105684

I get the error "PANIC: sleep - Sleeping at interrupt or STREAMS run time".

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I get the following panic:

PANIC: sleep - Sleeping at interrupt or STREAMS run time

I am running executables on SCO OpenServer 5.0.x that were compiled on SCO Open Desktop 3.0 with profiling enabled (the -p or -qp options to cc(CP)).

Applications developed on Open Desktop 3.0 can cause panics on SCO OpenServer Release 5.0.0 and 5.0.2 if profiling is enabled. Profiling is an option of the compiler that allows the application developer to identify how many times a line of code is executed when a program is run.

This is a known problem in the SCO OpenServer 5.0.0 and 5.0.2 kernel. It has been resolved in SCO OpenServer Release 5.0.4.

This particular problem only occurs with programs that have been compiled with embedded profiling. For a customer-ready program, profiling would normally be disabled since it would have a performance overhead associated with it and profiling is only useful during the development stage of an application.

Solution

A new set of binaries which resolves this issue has been created by SCO Engineering and is available upon request from SCO Support.

To identify this as the cause of the panic, run the following command within crash(ADM) against the dump: "u -f".

This produces an output of the user information associated with
the kernel.  If there are values other than 0 in the profiling
variables, profiling is enabled.  These variables are:
pr_base; pr_size; pr_off; pr_scale

A typical output of an application with enabled profiling:

> u -f
PER PROCESS USER AREA FOR PROCESS 45
USER ID's:      uid: 0, gid: 2, real uid: 1047, real gid: 50
        supplementary gids: 50
PROCESS TIMES:  user: 2313, sys: 55108, child user: 0, child sys: 0
PROCESS MISC:
        command: alarm, psargs: alarm
        proc: P#45, cntrl tty:   0,9
        start: Fri May  9 13:41:00 1997
        mem: 0x10ec769, type: exec
        proc/text lock: none
        current directory: I#747
OPEN FILES AND POFILE FLAGS:
          [ 0]: F#624        [ 1]: F#214     w  [ 2]: F#214     w
FILE I/O:
        u_base: 0x406b1d, file offset: 46829092, bytes: 0
        segment: data, cmask: 0022, ulimit: 4194303
        file mode(s): read write
SIGNAL DISPOSITION:
        sig#      signal oldmask sigmask
           1:     0x1697    -
           2:     0x1697    -
           3:     0x1697    -
          28: default       -
          29: default       -
          30: default       -
          31: default       -
        ux_uid: 0, ux_gid: 0, ux_mode:
        comp: 0xe0000d2a, nextcp: 0xe0000d2d
        bsize: 1024, pgproc: 0, qsav: 0xe0001148, error: -75249144
        ap: 0xe0001148, u_r: 0x25, pbsize: 1
        pboff: 36, pbdev:   1,42 , rablock: 0, errcnt: 5
        dirp: 0x1, dent.d_ino: 0 dent.d_name: udp, pdir: I#562
        ttyip:   - , tsize: 0x8, dsize: 0x12c, ssize: 0x2
        arg[0]:        0x1, arg[1]:   0x406af8, arg[2]:       0x25
        arg[3]:        0x1, arg[4]:  0x8059504, arg[5]:          0
        syscall: 0x4, ar0: 0xe0000e34, ttyp: 0xf01ad48a, ticks: 0x56a3d4
==>>    pr_base: 0x408ddc, pr_size: 7268, pr_off: 0x1d4, pr_scale: 16386
        ior: 0x9, iow: 0, iosw: 0xa, ioch: 0x28db212
        sysabort: 0, systrap: 0
        callgatep: 0, callgate[0]: 0, callgate[1]: 0
        debugpend: 0, debugon: 0
        dr[0]:          0,  dr[1]:          0,  dr[2]:          0
        dr[3]:          0,  dr[4]:          0,  dr[5]:          0
        dr[6]:          0,  dr[7]:          0
        entrymask: 00000000 00000000 00000000 00000000
        exitmask:  00000000 00000000 00000000 00000000
EXDATA:
        ip: I#891, tsize: 0x7290, dsize: 0x3318, bsize: 0x4098, lsize: 0
        magic#: 0413, toffset: 0xd0, doffset: 0x7360, loffset: 0
        txtorg: 0xd0, datorg: 0x400360, entloc: 0xd4, nshlibs: 0
        execsz: 0x15, ldtmodified: 0, ldtlimit: 256
>quit

If profiling has not been enabled, you should see the following:

> u -f
PER PROCESS USER AREA FOR PROCESS 108
USER ID's:      uid: 0, gid: 50, real uid: 0, real gid: 50
        supplementary gids: 50
PROCESS TIMES:  user: 8, sys: 2, child user: 0, child sys: 0
PROCESS MISC:
        command: crash, psargs: crash
        proc: P#108, cntrl tty:  58,4
        start: Wed May 28 15:06:39 1997
        mem: 0x8e1, type: exec
        proc/text lock: none
        current directory: I#415
OPEN FILES AND POFILE FLAGS:
          [ 0]: F#337   r    [ 1]: F#337     w  [ 2]: F#337     w
          [ 3]: F#429   r    [ 4]: F#337
FILE I/O:
        u_base: 0x80cf710, file offset: 28041848, bytes: 4096
        segment: data, cmask: 0022, ulimit: 2097151
        file mode(s): read
SIGNAL DISPOSITION:
        sig#      signal oldmask sigmask
           1: default       -
           2:  0x805eb50    -     2 13
           3: default       -
           4: default       -
          29: default       -
          30: default       -
          31: default       -
        ux_uid: 0, ux_gid: 0, ux_mode:
        comp: 0xe0000d0b, nextcp: 0xe0000d0f
        bsize: 1024, pgproc: 0, qsav: 0xe0000e34, error: -266449448
        ap: 0xe0001148, u_r: 0, pbsize: 49
        pboff: 0, pbdev:   1,40 , rablock: 0, errcnt: 7
        dirp: 0x4c, dent.d_ino: 0 dent.d_name: unix, pdir: I#122
        ttyip:   - , tsize: 0x6a, dsize: 0x89, ssize: 0x2
        arg[0]:       0x4c, arg[1]:     0x2c88, arg[2]:  0x80ce710
        arg[3]:    0x12000, arg[4]:        0x5, arg[5]:          0
        syscall: 0x32, ar0: 0xe0000e34, ttyp: 0xf0217502, ticks: 0x2aac5ab
==>>    pr_base: 0, pr_size: 0, pr_off: 0, pr_scale: 0
        ior: 0x3, iow: 0, iosw: 0x5a, ioch: 0x5922a
        sysabort: 0, systrap: 0
        callgatep: 0, callgate[0]: 0, callgate[1]: 0
        debugpend: 0, debugon: 0
        dr[0]:          0,  dr[1]:          0,  dr[2]:          0
        dr[3]:          0,  dr[4]:          0,  dr[5]:          0
        dr[6]:          0,  dr[7]:          0
        entrymask: 00000000 00000000 00000000 00000000
        exitmask:  00000000 00000000 00000000 00000000
EXDATA:
        ip: I#178, tsize: 0x19be4, dsize: 0xed78, bsize: 0x2094, lsize: 0
        magic#: 011065, toffset: 0x34, doffset: 0x19c18, loffset: 0
        txtorg: 0x8048034, datorg: 0x8062c18, entloc: 0x80014480, nshlibs: 0
        execsz: 0x30, ldtmodified: 0, ldtlimit: 256
>quit
To disable profiling, recompile the application without the -p
or -q[l|p] flags.
NOTE:     Profiling on SCO OpenServer Development System 5.0.0 is not the
          problem.  The problem lies with applications compiled on SCO Open
          Desktop 3.0 with profiling enabled that are run on OpenServer 5.0.x.

See also

Refer to the documentation on cc(CP), prof(CP) and lprof(CP) for further information on profiling.

From the Xinuos technical article database, record 105684. Reproduced with permission. The original is at www.sco.com/ta/105684, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.