Problem
I have Advanced File and Print Server installed under SCO OpenServer 5.0.x. When I add a user through "scoadmin account" and choose the option:
Networked Via: Advanced ServerI get the following error:"Could not add Advanced Server user <user_name>Or, if I try to modify an existing user to add:
Networked Via: Advanced Serverthe same error is displayed. Cause
It is likely that Advanced File and Print Server is not running.
Solution
To check if AFPS is running, type the following:
# ps -ef | grep lmx <Enter>You should see the following processes:lmx.ctrl
lmx.srv -s 1
lmx.dmn
lmx.browserIf these processes do not show up, try typing:
# /usr/bin/net start server <Enter>You should see:Advanced Server starting...After you get the prompt back, wait a minute or two to ensure
that AFPS is fully started (it is probably still starting up
after the prompt is returned). Then type:# ps -ef | grep lmx <enter>You should now see the lmx processes listed above.
===================================================================NOTE: The user you created as Networked via Advanced Server
should have been added and set up as an Advanced Server user
(likewise for an existing user that was modified). You can
check the status of AFPS users on the system by typing:# net user <Enter>The users that have been configured as AFPS users will appear.
NOTES: To check the integrity of AFPS you may want to, when possible,
shut down OpenServer and restart it. Once it has started, run:# ps -ef | grep lmx <Enter>to ensure that AFPS is starting properly on boot.
See also
ta100010 "'No such attribute isASUEnabled' occurs in SCOadmin with SCO AFPS."