Technical article 105538

I get the message "error opening volume: unknown volume format" on OpenServer 5.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

When I try to install CD-ROM installable software using the Software Manager, I get the error message:

error opening volume: unknown volume format

Cause

The exact scenario that causes this symptom has not been determined. The error message indicates the lack of support for the High-Sierra/ Rockridge filesystem. The following solution adds this support.

Solution

At the command line, run:
mkdev high-sierra

1. Add High Sierra / ISO9660 filesystem to system configuration.

2. Remove High Sierra / ISO9660 filesystem from system configuration.

Choose 1. If mkdev tells you it is already installed, remove it and re-add it. Relink and reboot. You should now be able to access the CD-ROM.

From the Xinuos technical article database, record 105538. Reproduced with permission. The original is at www.sco.com/ta/105538, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.