Technical article 110923

I get "WARNING: Serial: Garbage or loose cable on Dev0, port shutdown" on OpenServer 5.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

This message is being displayed on the system console:

WARNING: Serial: Garbage or loose cable on Dev0, port shutdown

Cause

This problem may be caused by the following:

- A very long serial cable that is overly sensitive to noise

- A faulty serial cable or serial port

- A modem that is disconnected from the system while the machine is running

Solution

Check all cabling. If you are running a long serial cable, make sure that it is properly shielded. Check your serial port and, if possible, try another port. If configured, leave modems connected to the system at all times, whether the power is turned on to them or not. If you need to disconnect a modem, do it from the computer end rather than the modem.

NOTES:    Dev0 corresponds to com1.
Dev8 corresponds to com2.

These Dev numbers correspond to the minor device driver numbers.

There is no way to disable this error message. The only way to get rid of it is to prevent it.

From the Xinuos technical article database, record 110923. Reproduced with permission. The original is at www.sco.com/ta/110923, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.