Technical article 107607

I'm having problems connecting to the Internet provider "PSINet" using PAP.

OpenServer 5.0.0

Written · Last revised

Problem

PPP connection fails to PSINet.  With debugging turned on, you
may see errors in /usr/adm/syslog similar to this:

Bad configure option (Rej) LCP:Send config_nak PAP fail: remote side rejects pap local PAP fails LCP:administrative close LCP:Send terminate_req

Cause

PSINet requests a non-standard ACCM setting (a0000) which SCO should be configured to match.

Solution

Add the following parameters to your /etc/ppphosts entry for PSINet:

mru=1500 flow=rtscts accm=a0000 noipaddr novj old proxy nomgc

Now, you will have an entry that looks similar to this:

remoteip:localip uucp=psinet attach=psinet mru=1500 debug=1 \ idle=10 flow=rtscts mask=255.255.255.0 accm=a0000 noipaddr novj \ old proxy nomgc

NOTE:     You may also need to use "noprotcomp" and/or "noaccomp", but the
          configuration list above is known to work with PSINet and PAP.

See also

ppphosts(SFF) manual page.

From the Xinuos technical article database, record 107607. Reproduced with permission. The original is at www.sco.com/ta/107607, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.