Technical article 105833

I'm unable to configure a 2-way login UUCP connection in SCO OpenServer 5.0.2, 5.0.4, and 5.0.5.

OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After following the procedure called "Connecting two local systems using a direct wire" in the UUCP chapter of the System Administration Guide to configure a 2-way login direct serial connection, the Test Connection With Remote Site option in the 'UUCP Administration Utility' (accessed from UUCP Manager in the Networks folder of SCOadmin, or uuinstall(ADM)) fails with the following output (only the first and last lines are shown here):

Which site do you want to try (or q to quit)? hertford

Testing connection to hertford . . . Call Failed: CAN'T ACCESS DEVICE

lockname(/usr/spool/uucp/LCK..hertford)

Cause

The SCO OpenServer 5.0.2, 5.0.4, and 5.0.5 versions of getty(M) do not recognize "direct" as a valid dialer type in /usr/lib/uucp/Dialers, and incorrectly set permissions on the corresponding device (/dev/tty2a in the above example) to bin/terminal instead of uucp/uucp.

Solution

This problem is fixed in SCO OpenServer Release 5.0.6.

For earlier releases, take the following steps:

Add the following line to /usr/lib/uucp/Dialers:
dummy

Add the following line to /usr/lib/uucp/Devices, where the tty device number and speed are set appropriately for your own system:

DUMMY tty2a - 9600 dummy
Change entries in /usr/lib/uucp/Systems that reference the Direct
device type so that "Direct" reads "DUMMY".  For example:
hertford Any DUMMY 9600 unused PEVEN ogin:-@-ogin:-@-ogin: uucp

See also

uuinstall(ADM)

From the Xinuos technical article database, record 105833. Reproduced with permission. The original is at www.sco.com/ta/105833, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.