Technical article 100090

I'm unable to get ARCserve to work with SPX or SPXII on SCO OpenServer 5.0.x.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

I am unable to get ARCserve to work with SPX or SPXII on SCO OpenServer Release 5.0.0, 5.0.2 or 5.0.4.

The "SCO ARCserve/Open from Cheyenne Documentation/SCO ARCserve/Open Client Agent for Netware Installation Guide", Chapter 1, "Installing and Using the Client Agent for Netware" states:

Supported Protocols:    SPX, SPXII, and TCP/IP

Cause

SCO OpenServer 5.0.x networking does not fully implement SPX or SPXII.

Solution

This documentation error will be fixed in a later printing.

NOTE:     SCO ARCserve/Open Release 2.1.0, 2.2.0 work fine using SCO's
          TCP/IP protocol.

From the Xinuos technical article database, record 100090. Reproduced with permission. The original is at www.sco.com/ta/100090, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.