Problem
An SCO UNIX-based system that had SCO ARCserve installed on it suffered a failure that resulted in the system being fresh-installed. After completing this and installing and licensing SCO ARCserve, tapes created previously with SCO ARCserve are not accessible.
Attempts to use cpio, tar or dd cannot read a tape created with ARCserve.
Cause
SCO ARCserve uses a proprietary tape format that is only
readable with SCO ARCserve. Tape backups created with SCO
ARCserve can only be restored if information about an SCO
ARCserve tape backup is in the SCO ARCserve database. If SCO
ARCserve has been installed fresh, the ARCserve database does not
contain information about previous SCO ARCserve backup tapes. Solution
Any SCO ARCserve tape that is not in the SCO ARCserve database needs to be "merged" into that database or SCO ARCserve will not recognize that tape.
To merge the data from a previous SCO ARCserve backup, use the
SCO ARCserve Utilities in SCOadmin. On the main X desktop, open:SCO System Administration --> SCO ARCserve/OpenThen from the the menu at the top choose:
Manager --> Utilities --> Merge TapeThen choose the tape group from which to restore the ARCserve tape. From the menu at the top, choose:
RunBy default ARCserve will only restore the first session on the tape
that is being "merged" from. Everytime a tape backup is made to a
tape under ARCserve a new session is created. Example: Session 1,
Session 2, and so on. If only your first session is merged you
will not see the full contents of the tape if more than one session
has been made.To merge all sessions from a tape back into the ARCserve Database, do the following:
Open the ARCserve GUI frontend Click on Manager -> Utilities -> Merge Tape (A new window will open "Merge Tape") Click on Merge -> Source Click on the "Merge All Sessions" option Click ok (You should be back to the "Merge Tape" window) Click on Merge -> Run -> ok
All sessions will now be restored to the ARCserve Database Manager.
As an alternative, the SCO ARCserve command line utility, as_merge, may be used to merge an SCO ARCserve tape's data to the present SCO ARCserve database.
No matter which method is used to merge SCO ARCserve data, merging
of a tape's data will take as long as doing a backup or restore of
that tape. After the merge session is complete the SCO ARCserve
database will contain information about that tape, and files on
that tape that can then be restored. If the backup history includes
use of many tapes over an extensive period of time, restore the SCO
ARCserve database files from the last backup, to enable access to
all previous tapes stored in the SCO ARCserve database.Note: Merging a tape will not restore data; it will only merge information about the contents of an ARCserve tape into the ARCserve database.
NOTE: If the SCO ARCserve "Recovery Disk Set" has been created, and
has been verified to work, that disk set would allow reading of
an the Emergency SCO ARCserve tape. See also
man as_merge(ARC), as_scan(ARC) as_dbmgr(ARC)TA100115, "What is the ARCserve database and how do I maintain it?"
TA100113, "ARCserve or ARCserve database keeps shutting down, or database is unreadable."