Technical article 109957

I receive the message "WARNING: iattr_add_to_shared_chain failed" during bootup.

OpenServer 5.0.5

Written · Last revised

Problem

I receive the message "WARNING: iattr_add_to_shared_chain failed" during bootup.

Cause

SCO OpenServer 5.0.5 (and Release Supplement RS505A) allow the
sharing of interrupts between unlike devices.  That is, this
release allows a SCSI controller and a network card to share the
same IRQ if necessary.  Previous releases of OpenServer 5 could
only share interrupts between devices of the same type (two NICs,
two SCSI controllers, and so on).
The message received at boot time indicates that the sharing of
interrupts was detected, and the kernel was trying to update one
of its tables with the information, but there was something
unexpected about the configuration and the update failed.  This
probably indicates that a particular combination of PCI device
and MP BIOS is not recognizable.

Solution

The message is a warning. You shouldn't notice a problem with the performance of your PCI devices.

Installing Support Level Supplement (SLS) OSS497C should resolve this problem.

See also

ta110105, "What is SLS OSS497C, the Core OS Supplement for SCO OpenServer Release 5.0.5?"

From the Xinuos technical article database, record 109957. Reproduced with permission. The original is at www.sco.com/ta/109957, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.