Technical article 108275

I removed VisionFS 2.0, but OpenServer 5.0.4 SCOAdmin still has an entry for VisionFS 1.2.

OpenServer 5.0.4

Written · Last revised

Problem

I upgraded from VisionFS 1.2 to VisionFS 2.0 on OpenServer 5.0.4, then removed VisionFS 2.0 using V97remove as stated in the Vision97/ VisionFS 2.0 documentation. However, the SCOAdmin VisionFS 1.2 entry still remains. How do I remove this entry?

Solution

SCO OpenServer 5.0.4 comes with a version of VisionFS 1.2 that has been integrated into the install/removal scripts for OpenServer 5.0.4. The VisionFS 2.0 version found on the Vision97 CD-ROM contains standalone install and removal scripts for the Vision97 family.

To remove the OpenServer 5.0.4 VisionFS 1.2 entry in SCOAdmin, you must first reinstall, and then remove VisionFS 1.2 as detailed in the instructions below.

REINSTALLATION

To reinstall the VisionFS 1.2 software that comes with OpenServer Release 5.0.4:

1. Mount the OpenServer CD-ROM:
# mount -r /dev/cd0 /cdrom

where -r means a read only mount (required), /dev/cd0 is the device representing the CD-ROM drive, and /cdrom is an empty directory to which the CD-ROM device is mounted. The specifics of your installation (device name and mount point) may vary.

Note: You can use the SCOAdmin Filesystem Manager to mount
      the CD-ROM filesystem. Select the appropriate choices
      from the available pull-down options.

2. Next, bring up the SCOAdmin Software Manager to install VisionFS:

Software  > Install New > from [your server]

Select Media Images from the "Media Device:" pull-down options, and select Continue.

You will be prompted for the Image Directory, which is the "visionfs" subdirectory of the CD-ROM mount point. For the above example, enter:

/cdrom/visionfs

and select OK. SCO VisionFS will be listed and selected in the "Select Software to Install" list. Select Install, and the VisionFS installation will begin.

3. You will soon be prompted to set up the SCO Vision License Services (sample screen below). Use the default settings.

------------------------------------------------------
Setting up SCO Vision License Services
------------------------------------------------------
Setup recommends that you use the following settings:

NSM port number = 16024 NSM master host = elected at run time Run NSM on this host? = if fewer than 3 NSMs running on local subnet License administrator = root Start VisionLS on reboot = yes

Are these settings OK? Y - Yes, use all these settings N - No, let me change the settings Q - Quit now

OK to use these settings? [y]

4. Follow the remaining screen prompts to set up VisionFS 1.2 (sample screen below).

All defaults are usable including "UNIX hostname," which
alternatively can be changed to the name of the server on
which you are installing. This name is the name you would
ping, and does NOT include the server's domain. For example,
madrid, NOT madrid.sco.COM.
----------------------------------------------------------
Setting up SCO VisionFS 1.2
----------------------------------------------------------

VisionFS Administrator = root (same name on UNIX and Windows) VisionFS server name = UNIX hostname

Start VisionFS on reboot? = yes (Run level = 2) Archive logs every week? = yes (Sunday 04:00 hours) Start VisionFS after Setup? = yes

Are these settings OK? Y - Yes, install using these settings N - No, tell me more about the options and let me change the settings Q - Quit now

OK to use these settings? [Y]

5. When prompted, enter the SCO VisionFS license from the license certificate which was supplied in the SCO OpenServer distribution carton. This license enables 5-user connections. If you do not enter a license number, you will be installing a 30-day evaluation copy of VisionFS.

When the installation has completed, the VisionFS server will be started automatically. No reboot is required.

6. If VisionFS does not start up, consider the following:

a. VisionFS can not run concurrently with either LAN Manager Client or SCO Advanced File and Print Server, both of which use NetBIOS. If the Advanced File and Print Server software is already installed and running when you install VisionFS, you must stop the server and netbios before starting VisionFS:

# net stop server
# netbios stop
# /usr/vision/bin/visionfs start

b. To confirm VisionFS is running, run a status:

# /usr/vision/bin/visionfs status

Or, you can check for vfsd processes:

# ps -ef | grep vfsd

c. If installed, NetBIOS typically starts up each time your server enters multiuser mode. To stop this from happening, you must rename the appropriate startup file located in the /etc/rc2.d directory, for example:

# mv /etc/rc2.d/S86netbios /etc/rc2.d/s86netbios

(The change is from an upper case S to a lower case s in S86netbios.)

REMOVAL

To remove VisionFS 1.2 from SCO OpenServer 5.0.4:

1. In the SCO OpenServer 5.0.4 SCOAdmin graphical desktop, double-click on the Software Manager icon.

2. Highlight VisionFS, and from the Software pull-down menu, choose Remove Software.

3. You will be prompted with the message:

Are you sure you want to remove this software? SCO VisionFS (1.20.970)

Click on the Remove button.

4. You will see the software removal screen removing VisionFS files.

When the Software Manager has finished removing VisionFS, the Software Manager screen will reappear and VisionFS will no longer be listed as installed software.

NOTES:    This problem can also arise if VisionFS 1.2 from the Vision97
          CD-ROM is installed on top of the VisionFS 1.2 installed with
          SCOAdmin. Unlike all the other versions of VisionFS, the VisionFS
          from the OpenServer 5.0.4 CD-ROM does not contain a copy of the
          V97remove script.

You can use the SCOAdmin Software Manager to install and remove ONLY the VisionFS distribution that comes with OpenServer 5.0.4. You must install and remove other VisionFS distributions per the instructions included with each.

See also

TA108376, "The VisionFS host does not appear in my Network Neighborhood."

TA108360, "How do I run VisionFS and AFPS on the same host?"

TA108274, "VisionFS 2.0 is in evaluation mode after installing OpenServer 5.0.4."

TA108276, "When installing VisionFS 1.2, I get "Invalid License Number".

TA108277, "I installed VisionFS 1.2 from the Vision97 CD, and am now having problems."

TA108209, "How do I install the VisionFS 1.2 that comes with my OpenServer 5.0.4 product?"

TA108261, "I purchased an upgrade to VisionFS 2.0 to install on OpenServer 5.0.4."

IT vision 279, "I tried to upgrade the SCO VisionFS 1.2 that comes with SCO OpenServer 5.0.4 and now VisionFS doesn't work."

From the Xinuos technical article database, record 108275. Reproduced with permission. The original is at www.sco.com/ta/108275, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.