Technical article 110069

I see occasional errors such as "Adapter open failed" and "Error 0x59 is unknown" from the tok driver during bootup.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

My token ring card occasionally shows the following warnings during bootup:

WARNING: tok(unit=0) - Adapter open failed WARNING: Error 0x59 is unknown

The TCP stack is not built properly and the system must be
rebooted.  Subsequent reboots may or may not reveal the same
problem.

Cause

The error "0x59" involves incomplete initialization of the network adapter, causing subsequent stack startup failure. The seemingly random nature of the startup problems could depend on how busy the network is.

The exact condition that may have caused this problem is that
there was a "Parameter Request Failure".  This usually means
that the adapter card has detected that the ring parameter
server is present on the ring, but the required response
has not been received in the allotted time (because of network
delay).

Solution

In some cases, switching to a PCI NIC has alleviated this problem.

From the Xinuos technical article database, record 110069. Reproduced with permission. The original is at www.sco.com/ta/110069, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.