Technical article 101586

IBM Auto LANStreamer PCI Network Card is not recognized at boot time.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I have configured my IBM Auto LANStreamer PCI Adapter into my
system.  When I reboot the system I get the following error
messages displayed at the hardware boot screen:
%wwdu        0x4100-0x41FF   -   -   Adapter Not Found
wwdu0: adapter reset - fatal error

This problem has been seen on an IBM PC750 system. The same card is recognized correctly on other PCI based systems.

Solution

A newer driver is available as part of the SCO Advanced Hardware
Supplement Version 5.2.  Install and configure the IBM Auto
LANStreamer PCI Adapter driver from AHS 5.2 into your system
to get the card correctly configured.

From the Xinuos technical article database, record 101586. Reproduced with permission. The original is at www.sco.com/ta/101586, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.