Technical article 104929

If I upgrade to SCO OpenServer Release 5.0.0, is my system tuned?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

When I add a User License pack or an SMP License to my system, then, as part of that process, my system is tuned to cater for the new users and CPUs.

However, if I upgrade from a previous release of SCO product to SCO OpenServer Host System Release 5.0.0 or SCO OpenServer Enterprise System Release 5.0.0, no tuning is performed.

Cause

Tuning was omitted from the upgrade process.

Solution

Follow the procedure outlined below:

The tuning that is performed when you add a User License Pack or CPU License to your system can be replicated by running the script:

/etc/tunek
The usage of this script is:
tunek -l <license type> -n <number>

where <license type> can be "user" or "cpu" and <number> can be 10, 25, 100, 500, or 1000 users or 1 in the case of a CPU License.

Note: Do not use any other arguments to this script.

Therefore, to tune an upgraded system for 100 users, type:

/etc/tunek -l user -n 100
Next, relink the kernel:
cd /etc/conf/cf.d
./link_unix

Reboot the system for the changes to take effect.

Running /etc/tunek is incremental. In other words, if you run the command again using the same parameters as above, and then relink, it will tune your system for an additional 100 users.

NOTE: You must relink the kernel after each invocation of tunek, in order for the desired incremental changes to take effect properly.

From the Xinuos technical article database, record 104929. Reproduced with permission. The original is at www.sco.com/ta/104929, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.