Technical article 104793

Install hangs at 'G' when installing with a DPT 2012B2 host adapter

OpenServer 5.0.0

Written · Last revised

Problem

Installation with a DPT PM2012/B2 SCSI host adapter on SCO OpenServer Release 5.0.0 hangs when it displays the letter G during the boot letter sequence phase.

Solution

The installation fails when you have this configuration:

- PM2012B2 and BIOS rev FW-0070-003G

- PM2012/B2 with no cache memory installed on the card

To work around this problem on the PM2012/B2:

- install cache on the PM2012/B2
- install BIOS rev FW-0070-005E on the PM2012/B2

SCO is aware of this problem and is working to resolve it. It is scheduled to be addressed in a future release.

From the Xinuos technical article database, record 104793. Reproduced with permission. The original is at www.sco.com/ta/104793, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.