Technical article 113002

Installation of Tarantella Enterprise 3 on SCO OpenServer 5.0.6 fails.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

During the installation of Tarantella Enterprise 3 on SCO OpenServer
5.0.6, the installation will fail.  You will see some of the
following errors during the installation:

Setting up server beans... Starting Tarantella server (version 3.01.905). Please wait... dynamic linker: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../bin/i386/green_threads/jre: OpenServer binary cannot load UnixWare shared object: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../lib/i386/green_threads/libjava.so /opt/tarantella/bin/scripts/start: 1983 Killed dynamic linker: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../bin/i386/green_threads/jre: OpenServer binary cannot load UnixWare shared object: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../lib/i386/green_threads/libjava.so /opt/tarantella/bin/scripts/stop: 2085 Killed ...finished setting up server beans.

./loadprobe_config: Set the interval and count dynamic linker: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../bin/i386/green_threads/jre: OpenServer binary cannot load UnixWare shared object: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../lib/i386/green_threads/libjava.so ./loadprobe_config: 2825 Killed

Cause

On OpenServer 5.0.6, Tarantella Enterprise 3 JRE requires that you install the Binary Compatibility Module 7.1.1 (OSRcompat) for SCO OpenServer Release 5.

Solution

Take the following steps:
          1. Download Binary Compatibility Module 7.1.1 for SCO OpenServer
             Release (OSRCompat) version 7.1.1 from:
	     http://www.sco.com/download

2. Make sure that a previous version is not installed using:

pkginfo | grep OSRcompat

If it is installed, then remove it using the command:

pkgrm OSRcompat

3. Install OSRCompat by following the instructions in the accompanying html file.

4. Carry out the following commands:
tarantella stop           (in case the server is still running)
tarantella start --setup  (rebuild some Java beans)
tarantella start          (starts the Tarantella server)
Finally, run:
tarantella setup
When prompted with:
--------------------------------------------------------------------------
Setting up Tarantella Enterprise 3
--------------------------------------------------------------------------
Tarantella Setup recommends you use the following settings:

Installation type = reinstall 3.01.905 Archive logs every week? = yes (Sunday 03:00 hours) Create default objects and webtop links? = no Create Tarantella printer? = no

Are these settings OK? Y - Yes, install using these settings N - No, tell me more about the options and let me change the settings Q - Quit now

Select "N"

For the "Create default objects and webtop links?", set to "yes", and complete the setup.

From the Xinuos technical article database, record 113002. Reproduced with permission. The original is at www.sco.com/ta/113002, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.