Technical article 105280

Installed SCO Internet FastStart and now my serial mouse is sluggish and jerky.

OpenServer 5.0.2

Written · Last revised

Problem

As part of the installation of the SCO Internet FastStart product,
I installed the Internet Supplement for SCO Internet FastStart 1.0
and SCO OpenServer 5.0.2 patch (rs.4.0a).  Now the operation of
my serial mouse has become slow and jerky.  The mouse was working
properly before this installation.

Cause

As part of the Internet Supplement for SCO Internet FastStart 1.0 and SCO OpenServer 5.0.2, the fifo interrupt trigger level was raised from 1 to 16 so that modem performance could be optimized. A side effect of this was to queue-up serial mouse events, making the mouse sluggish.

Solution

Using your preferred text editor, edit the file /etc/conf/pack.d/sio/space.c and modify the sio_fifoctl structure as shown in the following example.

For a system with a serial mouse attached to the COM1 port,
the first line of the sio_fifoctl structure should be replaced
with 0.  This example only shows part of the structure:
BEFORE:
unsigned char sio_fifoctl[CHANNELS] = {
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
AFTER:
unsigned char sio_fifoctl[CHANNELS] = {
0,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,
FCR_Rx14 | 15,

Relink your kernel by running /etc/conf/cf.d/link_unix -y and reboot the system.

This problem has been reported to SCO Engineering.

From the Xinuos technical article database, record 105280. Reproduced with permission. The original is at www.sco.com/ta/105280, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.