Technical article 107688

Installing a network card fails with message "/usr/lib/netconfig/init/net1 net1--sco_tcp lli Y does not exist".

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

I am attempting to install a network card and it is failing with the following message:

/usr/lib/netconfig/init/net1 net1--sco_tcp lli Y does not exist

Note: This may read net0, net2, net3 in place of net1.

Cause

A failed attempt at an earlier network installation or other similar system problem has left a erroneous file in the network database. This is causing the system to fail to install new network cards.

Solution

Look in the /usr/lib/netconfig/info directory.

If you do not have any network cards configured:

-  You will see a file named net0 and a file named net1.
-  Remove the file named net1 with the command:
rm net1

If you have a network card already configured:

-  You will see a file named net0, another named net1, and a third
   named net2.
-  Remove the file named net2 with the command:
rm net2

Restart netconfig and proceed to install your card.

From the Xinuos technical article database, record 107688. Reproduced with permission. The original is at www.sco.com/ta/107688, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.