Technical article 116264

Installing CSSA-2001-SCO.24 on OpenServer 5 causes certain shell utilities to fail.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

          Installing CSSA-2001-SCO.24 on OpenServer 5.0.x causes certain shell
	  scripts to fail.  Some known shell scripts that fail include idbuild,
          link_unix, visionfs, and lpstat.  The errors received vary greatly,
          but most of them report something similar to:
/<DIR> cannot execute
sh: <file> not found

Cause

          The /bin/sh binary included with the CSSA-2001-SCO.24 download had
	  some problems as it was inserting spaces in certain shell variables
	  and thus causing the shell to fail.  Such variables could be paths.
	  An example of this is:
#/bin/sh
BASE_DIR="/etc/conf"
OTHER_DIR="bin/"
$BASE_DIR/$OTHER_DIR/idbuild
The above may fail with:
sh: /etc/conf: cannot execute
sh: bin/idbuild: no such file or directory

Solution

This problem has been recently fixed in the CSSA-2001-SCO.24.1 download.

	  This is available from:
ftp://stage.sco.com/pub/security/openserver/CSSA-2001-SCO.24.1/

This CSSA was updated on December 4, 2001. Prior versions of this CSSA exhibit behaviors similar to those described above.

From the Xinuos technical article database, record 116264. Reproduced with permission. The original is at www.sco.com/ta/116264, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.