Technical article 105859

Installing OpenServer 5.0.4 on a Compaq Deskpro 6000 causes a kernel panic of type 6 following 'idainit'.

OpenServer 5.0.4

Written · Last revised

Problem

During the installation of SCO OpenServer Release 5.0.4 onto a Compaq Deskpro 6000, the UNIX kernel panics with a trap 0x06 after it has displayed the startup message "idainit", indicating that the kernel was in the process of initializing the configured IDA driver.

This problem may also appear on other Compaq Deskpro models.

Solution

If the Compaq Deskpro 6000 is not provided with the Intelligent Disk Array (IDA) controller, disabling the IDA driver from the kernel should resolve this problem.

In order to disable the IDA driver, at the initial Boot: prompt, specify:

defbootstr disable=ida

From the Xinuos technical article database, record 105859. Reproduced with permission. The original is at www.sco.com/ta/105859, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.