Technical article 107600

Is it possible to configure multiple default routes in OpenServer 5?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

To provide increased resilience to failure, a site has been configured with multiple connections via routers to an external network.

The external network should be used for access to any systems that are not present at the local site.

Is it possible to configure multiple default routes under OpenServer Release 5, in order to allow "backup" routes in the event of route or router failure?

Solution

SCO OpenServer 5 does not support multiple default routes.

TCP/IP can provide resilience to failure using redundant routes without the need to use multiple default routes.

A resilient connection to the network can be achieved by configuring the multiple routers to broadcast routing information (such as using RIP) in conjunction with the appropriate user level routing daemon (such as routed(ADMN)).

In normal use, all of the routers will be used.  Should a route
or router fail, the systems will switch to the remaining route(s)
or router(s) over time.

From the Xinuos technical article database, record 107600. Reproduced with permission. The original is at www.sco.com/ta/107600, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.