Technical article 101289

Is it possible to disable IPX/SPX routing on the SCO server?

OpenServer 5.0.0

Written · Last revised

Problem

Two networking cards have been installed on the SCO server. IPX/SPX has been configured as a protocol stack on both of them. IPX/SPX routing seems to be automatically enabled, by default, between these two cards. Is it possible to disable this feature?

Solution

Currently, there is no way to disable IPX/SPX routing on the above listed releases of the operating systems. The option to disable IPX routing is available on the following products:

SCO UnixWare Application Server Release 2.1 SCO UnixWare Personal Edition Release 2.1

From the Xinuos technical article database, record 101289. Reproduced with permission. The original is at www.sco.com/ta/101289, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.