Technical article 115942

Is NetWare 5 connectivity supported by SCO products ?

OpenServer 5.0.5OpenServer 5.0.6UnixWare 7.0.0UnixWare 7.0.1UnixWare 7.1.0UnixWare 7.1.1Open UNIX 8

Written · Last revised

Problem

Is there any support for NetWare 5 in the SCO product line?

Solution

There is no support for Netware 5 connectivity from either Open UNIX 8, Unixware, Openserver or OpenLinux.

Novell made some changes to the sapd communication layer which causes Openserver 5 to be unable to see any Netware 5 based servers.

Unixware 7 can see Netware 5 servers and some form of connectivity is achieved but Novell removed the NUC.NLM functionality which may prevent authentication.

In addition, the NDS schema has also been changed by Novell and any Netware 4 server without some Novell supplied patches will be unable to utilise the NDS tree. These patches are not available for either UnixWare 7 or OpenServer.

As Unixware 7's NDS is based on Netware 4.10a no connection to a newer version NDS is possible.

All Netware connectivity has been removed from Open UNIX 8. However, Novell's Netware 5 is now using TCP/IP tools and here are the equivalences:

IPX              TCP
nwlogin          telnet or rlogin
NUCFS            NFS
nwprint          LPD printing

From the Xinuos technical article database, record 115942. Reproduced with permission. The original is at www.sco.com/ta/115942, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.