Technical article 127577

Is there support for the Dell controllers H200, H700, and H800?

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.4

Written · Last revised

Problem

Is there support for the Dell controllers H200, H700, and H800?

Solution

The H700 and H800 controllers are LSI MegaRaid based controllers. The latest driver available for OpenServer6/UnixWare7 is available from LSI:

http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/5.03_SCO_HWR_driver5.zip

The H200 controller also available from Dell uses a different chipset and there is no current driver available for this product.

There is no OpenServer 5 driver available for any of these controllers.

NOTES:    The following limitation has been observed with on a Dell T610 with
          the H800 controller:

With, for example, 5 x 300G SAS drives in a RAID-5 + hotspare setup giving a root disk over 850G in size, the server kernel panics during installation at the point before the mouse test phase.

To workaround the problem the system was setup with 2 x RAID-1 arrays giving approximately 600G of disk space.

Installation could then proceed using the notes in the CHWP section of http://www.sco.com/chwp for this particular server.

See also

TA125841, "What PERC Raid controllers and Dell Machine combinations are certified on SCO products."

TA127473, "Is there a driver support for the new LSI MegaRAID 6GB SAS controllers under SCO OpenServer 6.0.0 and UnixWare 7.1.4?"

TA127235, "Where can I get the latest SCO OpenServer 6 / UnixWare 7.1.4 LSI "megasas" HBA driver for the LSI MegaRAID SAS controllers?"

From the Xinuos technical article database, record 127577. Reproduced with permission. The original is at www.sco.com/ta/127577, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.