Technical article 112162

It is taking about 30 seconds to process incoming remote print jobs on OpenServer 5.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After sending a remote print job to an SCO OpenServer 5.0.5 or later system, I've noticed that the job stays in the OpenServer print queue for at least 30 seconds before it starts printing. Previous versions of OpenServer did not have this delay.

Cause

SCO OpenServer 5.0.5 introduced this delay in processing incoming remote jobs to allow for remote administration functions.

Solution

This delay is configurable in a variable introduced in Support Level Supplement (SLS) OSS497, the Core OS Supplement, (and is included in 5.0.6) called PRINTJOB_LAG which can be set in the file /etc/default/lpd.

From the OpenServer 5.0.6 manual page for lp(C):

PRINTJOB_LAG configures the lag time between printing remote jobs. (By default, this lag is 30 seconds.) Setting this value to a few seconds can increase system load significantly, while setting it to zero can interfere with attempts to administer print jobs remotely.

See also

ta110105, "What is SLS OSS497C, the Core OS Supplement for SCO OpenServer Release 5.0.5?"

Manual page: lp(C)

From the Xinuos technical article database, record 112162. Reproduced with permission. The original is at www.sco.com/ta/112162, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.