Problem
I have upgrade my system to SCO OpenServer 5.0.7 (or OpenServer 5.0.6), but now one or more of my applications do not behave correctly. Problems with the applications include:
1) Lines within the application being drawn incorrectly or otherwise corrupted.
2) Changes to colors displayed within the application Cause
The scoansi terminal emulation was updated in SCO OpenServer Release 5.0.6 to improve conformance to the ANSI X5.64-1979 escape sequence standard. This can result in problems for applications that expect the older (pre OpenServer 5.0.6) scoansi terminal emulation and have hardcoded the control of the terminal into their application.
Solution
There are two areas that may need to be addressed to fix this problem.
1) If you are running the application on the SCO OpenServer system console then you will need to change the in-kernel scoansi terminal emulator. To do this, as root, run the command:
# mkdev scoansiand choose option 4) from the menu that is presented.
Choosing this option will rebuild your kernel and you will need to reboot your system for these changes to take effect.
2)If you are running the application from any device (including a PC running an ansi terminal emulator) then you will need to do one of the following:
a) At login time get the user to set their TERM type to either:
scoansi-oldoransior set this up automatically as part of the default profile for the users.
b) As root, run the command# mkdev scoansiand select item 2) from the menu. This will set the scoansi TERM type to it pre -OpenServer 5.0.6 behavior
See also
TA112082 "The terminal type 'scoansi' is not behaving as expected and/or applications in scoansi dump core on OpenServer 5.0.6/7."
TA125752 "My legacy OpenServer applications do not work in a scoansi terminal as expected on SCO OpenServer Release 5.0.7"
mkdev(ADM)