Technical article 104928

mkdev eccd does not work with Corollary or Corollary compatible architectures.

OpenServer 5.0.0

Written · Last revised

Problem

I have a Corollary or Corollary compatible CBUS-II system with Error Correction Code (ECC) Memory and would like to use the ecc(ADM) utility and eccd Daemon to monitor memory. I have installed SCO OpenServer Release Supplement 5.0.0d, as this supplement is required to support ecc(ADM) on CBUS-II systems.

When I run mkdev(ADM) eccd this error message occurs:

ECC Daemon Initialization Program can only be run on machines with Corollary or Corollary compatible architectures.

Cause

The ecc_ driver is usually configured into the kernel during
installation.  ECC memory on the CBUS-II systems is not detected
or supported by the install kernel and is not configured.
The mkdev(ADM) eccd script checks that %ecc has been recognized at
boot time.  If it has not, it issues the error message mentioned
previously.

Solution

You need to manually add the ecc_ driver to the kernel and relink and reboot the system before you can get the mkdev eccd script to recognize the ECC Memory on your system. To do this:

1. Enter Single User mode.

2. Edit the file /etc/conf/sdevice.d/ecc_ and change the N in the second field to a Y so that it looks like:

ecc_    Y       1       0       0       0       0       0       0       0
3. Relink the kernel using the scoadmin(ADM) Hardware/Kernel
Manager and reboot your system.  You should now see this message
on the hardware initialization screen:
%ecc      -             -       -       EDAC support active

4. mkdev(ADM) eccd should now function correctly.

From the Xinuos technical article database, record 104928. Reproduced with permission. The original is at www.sco.com/ta/104928, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.