Technical article 110177

Morning Star PPP dynamic outbound connection does not set siofifo correctly.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

SCO PPP from Morning Star dynamic outbound connection does not
set siofifo correctly.

Solution

There is a typographical error in the /usr/lib/mstppp/exec.dialout
shell script.  This line:
if [ expr match $PPP_DEVICE 'tty[0-9][0-9]*[A-Za-z]' ]; then
should look like this:
if expr match $PPP_DEVICE 'tty[0-9][0-9]*[A-Za-z]' >&- ; then

Once you make the change, the script should run properly.

If you are using SCO PPP from Morning Star 2.1.1 through 2.1.3 to
dial out on 16550 UART SCO tty devices (that is, standard COM
ports tty1A, tty2A), at speeds of 38400 baud or higher, you should
see modestly improved throughput if you make this change to the
script.  Users who don't match that profile are not affected by
the typographical error and don't need to make the change.

From the Xinuos technical article database, record 110177. Reproduced with permission. The original is at www.sco.com/ta/110177, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.